|
|
Sailing Yacht
"HANSEAT
IV" - Rig, Sails and Decks-hardware
Rig:
Manufacturer: Marten Spars Ltd., Auckland, New
Zealand.
Mast and Boom are made of carbonfibre.
Boom is manufactured under Leisure-Furl license
for mainsail stowage and reefing.
Mast has 4 swept back spreaders (carbonfibre)
Boom has integral custom-made sunshade systems
Mast and Boom have integrated mast and cockpit
illumination systems
Standing rigging: Riggarna, stainless steel 316
Rods,
Running rigging: Vectran halyards and Spectra
sheets
The entire Rig is painted with Awlgrip paints in
Oyster white.
Boomvang and Backstay cylinders: Navtec
Genoa and Staysail Furler: Reckmann RF90-3 R50, resp.
R40 in stainless steel
Sails:
Manufacturer: Doyle Bouzaid Sails Ltd. Cruising,
Auckland, New Zealand.
Material: Vectran
All sails are hydraulically furled, except APC (MPS)
which is stowed in a sleeve.
|
Measurements: |
I = 29,024 m |
J = 8,816 m |
| |
P = 26,188m |
E = 9,616m |
|
Sizes of sails: |
|
|
|
Mainsail |
143.9 m2 |
|
|
Genoa |
139 m2 |
|
|
Staysail |
57 m2 |
|
|
APC (MPS) in Nylon in rainbow colours:
406 m2 |
|
The
deck hardware is supplied from Harken’s custom
stainless steel line, including traveler tracks and
cars, blocks and end stops.
The winches are supplied by Lewmar and are
again in stainless steel:
Two Primaries 88/3 SHST
One Mainsheet 77/3 SHST
Two Halyard 77/3 SHST
Deck hatches are Lewmar Ocean Range, polished
Aluminum
Lazarette and Decks locker are closed with teak laid,
gas ram supported lids
The Dinghy is stowed in a dedicated Garage in the
Foredeck, which is closed by a hydraulically driven
large size hatch.
Two Captive Winches, one Lewmar and one Nielssen,
are installed in Deck lockers outside of the Dinghy
hatch.
A decks shower is installed on the aft deck
Mooring bollards, cleats and fairleads are custom
made and of stainless steel 316.
Hull ports are manufactured by Van Wingerden
in stainless steel and fitted with storm blinds.
Coaming ports are supplied from Hood and are made
of stainless steel as well.
The Anchor is a Bruce, stainless steel, 90kg,
with an 80 m galvanized 16 mm chain. There is a 40 kg
Fortress Anchor and 20 m chain forerunner in spare.
The anchor windlass Type Simpson Lawrence
Pacific, model VGD, Series 2B, hydraulic, is
vertically installed and operated by Remote Control,
through which also the chain washing equipment is
activated.
The Passarelle is hydraulically operated, 3 parts
extendable and 15 degr. up and down tilting.
Lifelines, stanchions, pushpit and pulpit are custom
made and of stainless steel. Four stanchions on either
side are telescopic. When extended, they serve as
holding points for the Sun awning, which is
integrated in the Boom. A Sprayhood is installed
over the main companionway.
2 Pilothouse Windows are fitted with 2 two-speed
wipers with washers. |
|
The
above information is believed to be correct and
complete. No guarantee however is given for its
correctness
and consequently no damage, if any, for any
error or omission are accepted. |
|
|
